Lancer Register Forum banner

Which pads do you think would be best?

  • Endless CC-RR

    Votes: 2 17%
  • Mu HC-CS

    Votes: 1 8.3%
  • Mu HC+

    Votes: 9 75%

Endless vs Project Mu

1 reading
17K views 15 replies 11 participants last post by  Genba  
#1 ·
My choices are Endless CC-RR vs Mu HC-CS/ HC+

I have a standard car with standard discs, but plan on doing a few track days. Also, I would like some pads that stop me quickly for mountain driving :naughty: . My tyres are ADVAN AD08s.

What is the difference between the Mu pads? So the HC-SS will be more controllable than the HC+? What exactly does that mean :confused:

I’m thinking it’s between the Endless and HC+
Which do you guys think it would be best to go for?
 
#4 ·
I am running these at the moment and am going to be doing a full write up on them, but all I can say is I have run a lot of pad combos in my time and the Mu HC+ are the best so far ;)

I run stock discs and Brembo's with the HC+, I test drove a car a few weeks backs with Ap's and Ds2500's and my set up was far better, infact it was miles better.

Mu Hc+ are the way forward imo :smthumbup

Lee
 
#3 ·
My choices are Endless CC-RR vs Mu HC-CS/ HC+

I have a standard car with standard discs, but plan on doing a few track days. Also, I would like some pads that stop me quickly for mountain driving :naughty: . My tyres are ADVAN AD08s.

What is the difference between the Mu pads? So the HC-SS will be more controllable than the HC+? What exactly does that mean :confused:

I'm thinking it's between the Endless and HC+
Which do you guys think it would be best to go for?
the Project Mu HC+ operate from cold to 800 degrees C, they will stop you like an anchor mate!;):smthumbup
 
#12 ·
ive had pf's, ebc red's, straight bembo's pads, and dixcel pads running the HC+ now and apart from dixcel are the only ones that stop me with this much confidence...

the rest are good but these two are my fav's (though dixcels were very very expensive!!)
 
#14 ·
Have run a few different pads, Pagid, Ferodo, Endless, Project U and now APP (with ap 6 pots), the SCR pro rotors with HC+ pads (in stock Brembo's) were very very good, they are a street/track pad and I have a track only car but never had fade, if I was to upgrade I'd go to a H16-03 which is a track only pad, the APP type RA I'm using is 200-800 deg pad so same same. Yet to find something over here comparable in price and quality.