Lancer Register Forum banner

1 - 20 of 20 Posts

·
Registered
Joined
·
289 Posts
Discussion Starter #1
Just got back from WRC thanks for your help today guy's

Base run was 351hp & 340ft/lbs at the fly with just a de-cat :)

After about an hour's tinkering here are the final results. :)



Yes that is 370ft/lbs :) :coolsm:

The car has been transformed to drive its soo much smoother and the pickup is astonishing, 6th on the motorway is now like 5th used to be :)

Thanks again to WRC :cool:

The car is now an FQ car ;)
 

·
Registered
Joined
·
1,265 Posts
Cracking figures :coolsm:
Mines booked in next week :D
How long did it take WRC to do it? They said they would keep mine over night to check cold start the following morning
Have you got an induction kit fitted?

Tesh
 

·
Registered
Joined
·
289 Posts
Discussion Starter #5
Tesh said:
Cracking figures :coolsm:
Mines booked in next week :D
How long did it take WRC to do it?
Have you got an induction kit fitted?

Tesh
Thanks fella

Takes about an hour or so on the rollers then a road run....

No induction kit just the green HKS panel filter in the standard box :)
 

·
Registered
Joined
·
1,265 Posts
A couple of hours then :D
So I'll be able to do the trip in one day :coolsm:
They may be able to squeeze a couple of more bhp out of mine with the APS induction fitted.
Cant wait!!!
 

·
Registered
Joined
·
289 Posts
Discussion Starter #7
Tesh said:
A couple of hours then :D
So I'll be able to do the trip in one day :coolsm:
They may be able to squeeze a couple of more bhp out of mine with the APS induction fitted.
Cant wait!!!
Yeah maybe, they did say that if I wanted to change the induction and fit the cooler then should see 395hp & same torque be interested to see your results...... :)
 

·
Registered
Joined
·
289 Posts
Discussion Starter #9
Yer........... APS intercooler :)

I'm happy with what I got and its stealthy ;)
 

·
Registered
Joined
·
2,015 Posts
the look on you're face when chris gave you the figures was a peach, and i bet that smile stayed on your face all the way home.
just to let you know i got an extra 15 bhp & 6 lbs-ft when they fitted the decat. when we were talking i said that if the bhp went up and the torque stayed the same i would be happy, so to get an increase in torque was a bit of a pleasant supprise.
 

·
Registered
Joined
·
450 Posts
Boost

No need for a long reply now, you spotted the correct numbers

Big al
 

·
Premium Member
Joined
·
4,874 Posts
Re: Boost

uktrucks said:
Dark Evo
The boost is just around 1.5 Bar that other curve is the BHP but it finishes on the pressure side of the graph. If you see what I mean ?

Big Al
Sorry my mistake (now edited)

Another Good Result from the WRC crew :cool:
 

·
Premium Member
Joined
·
8,486 Posts
Very, very good figures :coolsm:

In theory then, the MR320 with decat should show the same results ;)
 

·
Registered
Joined
·
289 Posts
Discussion Starter #16
insaneyouth said:
the look on you're face when chris gave you the figures was a peach, and i bet that smile stayed on your face all the way home.
just to let you know i got an extra 15 bhp & 6 lbs-ft when they fitted the decat. when we were talking i said that if the bhp went up and the torque stayed the same i would be happy, so to get an increase in torque was a bit of a pleasant supprise.
Blimey bet your well happy with that :coolsm:
 

·
Registered
Joined
·
289 Posts
Discussion Starter #17
BHP said:
Very, very good figures :coolsm:

In theory then, the MR320 with decat should show the same results ;)
In theory yes but my car is a bit special ;)
 
1 - 20 of 20 Posts
Top