Lancer Register Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
anyone fitted E6 TME rims 5 x 114.3 (PCD), offset 38, measure 17 x 7.5JJ to E4 GSR?! will it rub the fender or inner wheel arch?! what's the recommended tire size to use ie. 215/45R17, 215/40R17 or ?? need help...
 
G

·
Discussion Starter · #2 ·
Re:will E6 TME 17

Off set on the E4 wheels are 46 so unfortunately are no good ,minimum would be 44/45.but PCd 114.3 ok guess you could get them machined especially if you get the wheels very very cheap.
 
G

·
Discussion Starter · #3 ·
Re:will E6 TME 17

thanx for the info paul... what's the specs of the original E4 rims?! is it 16 x 6.5JJ x |PLS|46offset [114.3 x 5 holes]?! my E4 came with 16 Works rims but i still prefer OZ design wheels... btw, what's the ideal size for 17 rims-n-tires on E4?!
 
G

·
Discussion Starter · #4 ·
Re:will E6 TME 17

Original Post:
thanx for the info paul... what's the specs of the original E4 rims?! is it 16 x 6.5JJ x |PLS|46offset [114.3 x 5 holes]?! my E4 came with 16 Works rims but i still prefer OZ design wheels... btw, what's the ideal size for 17 rims-n-tires on E4?!
Sk -Evo
Personally I would only go to 17 x8 and fit 225 x 40/45 x 17 tyres .the Evo 5 s are running theses .
I am running 225/45/16s at the moment .
Apperently once above 17s the car starts to feel alot difference to steer.
I
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top