Lancer Register Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14,964 Posts
A lot of people using ECUFlash use the Innovate LC-1, but a lot of widebands are compatible with Evoscan.

The bundle here is a good deal if you haven't got the tactrix cable for Evoscan:

>>>Tactrix/LC-1 Bundle<<<

The LC-1 can be used either permanently installed with a boss in your exhaust, or temporary with a pipe in your tailpipe.
 

·
Registered
Joined
·
14,964 Posts
Hi Mark,

Yes, you can buy the LC-1 on its own from various places including direct from Innovate, which I'd imagine would be the cheapest place. I'll pm you a discount code when I get home this evening if you like, it will get you something like 5% off.

The LC-1 has a 9 pin serial out (female) connector from the control box to you laptop. If you don't have a male 9 pin serial in port on your laptop, you can get serial to usb converters for about £5.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top