Lancer Register Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2,616 Posts
Discussion Starter · #1 ·
hi am going to fit a 6rs turbo to my 4 and its complete with a e6 turbo elbow is there anything that can be done to the elbow befor i fit it as its of and just sitting there (to improve performance) of corse ?? thanks
 

·
Registered
Joined
·
3,231 Posts
You could take a die grinder to the internals and remove any burrs and/ or casting marks. Then open up the outlet as far as possible too...

Paul
 

·
Premium Member
Joined
·
7,656 Posts
simply fitting the turbo with the elbow will give a gain over the stock e4 item.it may spool slightly later but overall a better upgrade.
 

·
Registered
Joined
·
2,616 Posts
Discussion Starter · #6 ·
thats cool then at the min im hoping for around 340/340 just thought i would ask befor i fit the turbo cheers
 
1 - 6 of 6 Posts
Top