Lancer Register Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
I've bought a second evo 5 with the intention to swap over parts between the cars to build the best version I can. My silver 5 has an evo 8 ayc diff now and the new black car has an evo 8 rs diff (or whatever model the rs diff comes from).

Is there a guide anywhere I can see to do the swap, any advice on the job and how to totally remove any trace of the ayc system, lines, electronics etc?
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #4 ·
Okay so I've read up as much as I can on how to do the swap...it seems the simpler approach is to leave the driveshafts attached to the hubs and disconnect them from the diff? Question though is will I need to replace the driveshafts that are with the RS diff? If so then I'll have to remove the driveshafts anyway.

On your ABS comment Grants, I have now read multiple threads where people say abs is no affected at all and runs fine without the AYC, it's the reverse that doesn't work.
 
1 - 6 of 6 Posts
Top