Lancer Register Forum banner

1 - 5 of 5 Posts
G

·
Discussion Starter · #1 ·
I have a standard EVO 6 GSR which has done about 14000 miles.

Has anyone recently obtained dyno figures for a similar car with similar mileage?

The car has definitely got quicker as the engine has loosened up.

Your comments please !
 
G

·
Discussion Starter · #2 ·
If you look at the Tuning Japanese website(link in the links page)they have the dyno graphs for my car.It is A6EVD.I think it was 283.5BHP.That was when it had about 9000 miles.There were another couple of standard ones there all with around the same.I think 291 was the highest of all the standard cars.
 
G

·
Discussion Starter · #3 ·
Mine was the 291 bhp VI http://www.ltregister.f9.co.uk/graphics/Happy.gif border|EQU| 0 align|EQU| middle >, standard bar a dash of octane booster. Torque was a bit down on std at about 265lb-ft. I had about 8,500 mls on the clock at the time. Can't say if it has loosened as I had mods soon after, so no comparables.

Steve.
 
G

·
Discussion Starter · #4 ·
I dynoed my EVO VI TME last week, the car has done 19000km ( about 11500 miles ) and the figures I obtained was 300 HP and 376 Nm ( don´t know how many lb-ft it is )
 
1 - 5 of 5 Posts
Top