Lancer Register Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter · #1 ·
What is the proper gap for the plugs? I have BPR7ES, stock coils with NGK wires. Running on 1.5bar and gapped it on around 0.55 but I still get some hesitation on 3rd/4th/5th gear pulls.

Any advices? Thanks:)
 

·
Premium Member
Joined
·
22,095 Posts
What is the proper gap for the plugs? I have BPR7ES, stock coils with NGK wires. Running on 1.5bar and gapped it on around 0.55 but I still get some hesitation on 3rd/4th/5th gear pulls.

Any advices? Thanks:)
i'd be trying new coil packs and new plugs, cant really go any smaller

Stu
 

·
Registered
Joined
·
625 Posts
Needle point plugs like double platinums always give a better spark.
It might also be running too rich.
 

·
Registered
Joined
·
5,767 Posts
Update:
Replaced my fuel filter and it did the trick. No more hesitations on pulls. :)
Stupid question, fuel filter is on the fuel pump, right?

I have a similar issue to you, but my fuel pump is practically brand new.....so can't be filter that's the issue?
 

·
Registered
Joined
·
50 Posts
Stupid question, fuel filter is on the fuel pump, right?

I have a similar issue to you, but my fuel pump is practically brand new.....so can't be filter that's the issue?
fuel filter is in the engine bay mate on the right hand side near the suspension turret
 
1 - 12 of 12 Posts
Top