Within this thread I will attempt to put a fools guide together so that even the most inexperienced of you lot can carry out this task.
Time taken: 1HR
Step 1
Firstly remove your heat shield. No pictures for this as it's pretty straight forward.
Once the heat shield has been removed you have now exposed the exhaust manifold making it easier to remove the SAS system.
Using a 24mm Socket remove the 2 Banjo bolts being careful not to lose the 2 washers on each bolt (1 either side of the SAS pipework).
Time taken: 1HR
Step 1
Firstly remove your heat shield. No pictures for this as it's pretty straight forward.
Once the heat shield has been removed you have now exposed the exhaust manifold making it easier to remove the SAS system.
Using a 24mm Socket remove the 2 Banjo bolts being careful not to lose the 2 washers on each bolt (1 either side of the SAS pipework).
