Lancer Register Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter · #1 ·
Re fitting my SAS system (didnt have one when got car) and not 100% sure where to connect the vacuum hose from the SAS to?
Ive found the SAS solenoid which has 2 vacuum pipes coming off it, 1 to a cannister next to the solenoid and the other goes to the the throttle body.
 

·
Registered
Joined
·
128 Posts
Discussion Starter · #3 ·
ok, iv checked my pipework at it all to ****! what hose connects to the bottom of the metal pipe on the right hand side that the top outlet goes to the sas?
 

·
Registered
Joined
·
1,565 Posts
ok, iv checked my pipework at it all to ****! what hose connects to the bottom of the metal pipe on the right hand side that the top outlet goes to the sas?
Goes to the throttle body if I'm reading your post right. Just does a 90 degree turn, think theres only the on place for it on the evo 4 throttle body.
 

·
Registered
Joined
·
128 Posts
Discussion Starter · #5 ·
Found a parts list diagram, the company who fitted the engine had the sas solenoid and canisters piped incorrectly. Thanks for your help.
 
1 - 5 of 5 Posts
Top