Lancer Register Forum banner

Rota Grid Drift 9.5J et 30 on a 5

739 Views 1 Reply 2 Participants Last post by  trailerman
Searched all over the internet but cannot find the answers to a few questions regarding these wheels. Help would be appreciated.

What size extended studs will I need for the 10mm spacers up front?

Found these on fleabay.

I can only find Eibach hubcentric in stock in the UK but it states they are for a VII. Cant find any labled as for a 4, 5, or 6. Are the hubs the same size?

Lastly will i need open ended nuts or will the spacers take up enough of the thread to use the nuts supplied with the wheels.

1 - 2 of 2 Posts
standard bolts will be ok .
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.