Lancer Register Forum banner
1 - 20 of 27 Posts

·
Registered
Joined
·
19,543 Posts
You will get a CEL shortly unless you disable the fault in the ECU or swap to rom ID 99270000. The sensor gets warm as it's heated, so make sure it's not touching anything.
 

·
Registered
Joined
·
1,159 Posts
Discussion Starter · #5 ·
You will get a CEL shortly unless you disable the fault in the ECU or swap to rom ID 99270000. The sensor gets warm as it's heated, so make sure it's not touching anything.
Ive disabled the rear O2 using ECUflash. :smthumbup

I put a plastic bag over it to stop it getting covered in crap! Will this melt off if i dont remove it? :eek::confused:
 

·
Registered
Joined
·
19,543 Posts
Did you do the periphery mod or change the rom to 99270000? Will probably get hot enough to melt a plastic bag.
 

·
Registered
Joined
·
19,543 Posts
No, I will look for the rear O2 heater circuit CEL disable in the periphery bits, so you can remove the sensor with that rom also.
 
1 - 20 of 27 Posts
Top