Lancer Register Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
1,403 Posts
Discussion Starter · #1 ·
Having my SARD fitted tonight, whats the best pressure to set it to to be safe, ive got it booked in for a fueling check on the 5th of April, i wont be running over 1.4 bar until then
 

·
Registered
Joined
·
1,403 Posts
Discussion Starter · #11 ·
think ill drop it down tonight then, would i not get a huge amount of flames if i was getting bore wash?

I got my SARD 2nd hand from a member on here so cant really help with where to get one
 

·
Premium Member
Joined
·
16,922 Posts
yes m8 doesn't change much when you put it back on though
It should drop quite a bit with the vac pipe on :confused: .... mine goes from 42psi down to 36psi... which may not sound a lot but every psi makes a big difference to fuel supply....also dont have it set too high as bore wash will cause serious damage to your engine. HTH

Ian
 

·
Premium Member
Joined
·
19,837 Posts
AlBoy said:
think ill drop it down tonight then, would i not get a huge amount of flames if i was getting bore wash?
Not necessarily. If you've got too much fuel, it may just dribble out the exhaust and not vaporise enough to actually ignite.

Andy
 
1 - 14 of 14 Posts
Top