Lancer Register Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
164 Posts
Discussion Starter #1
hello.i'm half way removing the front bumper of my evo6 tme.and i stuck in some area .above the intercooller and below the mitsubishi sign :mitsi: there is some kind of bolt behind there.but i could't reach it .if any one have the diagram will be nice.thanks
 

·
Registered
Joined
·
164 Posts
Discussion Starter #2
please HELP!!!half way removing front bumper

hello.something stuck above intercooler ,below the :mitsi: sign.can't slide out !!! :confused: any one have the daigram please help-thanks
 

·
Registered
Joined
·
690 Posts
hi there
I think there is a row of about 6 bolts that are under the Mitsi badge, (you can get to them easily just look directly down with the bonnet open) that need to come out or there are 4 bolts 2 either side in the chassis legs

Hope this helps
Duncan
 

·
Premium Member
Joined
·
11,249 Posts
There are 4 bolts underneath the car in the chassis rails that hold 2 arms from the center of the bumper in place.
 
1 - 8 of 8 Posts
Top