Lancer Register Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,216 Posts
Discussion Starter · #1 · (Edited)
Just popped the air filter out on the 320 and noticed abit of oil in the air filter housing... Nothing major...

Turbo no the way out?
 

·
Premium Member
Joined
·
20,608 Posts
As mentioned , if the pipe from side of rocker cover was plumbed back into intake pipe after MAF (standard oem evo set up ) then id expect small hint/midt of oil residue .....but if you have no such scenario then .......id be looking at turbo as you said :thumbup:
 

·
Premium Member
Joined
·
20,608 Posts
Sorry to hijack but i have this on mine and have the breather connected, would i benefit from a catch can and would i need to connect both breathers from the cam cover cheers
You can have one pipe from side of block going to a catch can , and then return pipe from catch can to intake pipe after maf , less chance of oily mist then
I only had the pipe from rear of block (pcv valve ) hooked up to catch can when running on MAP based PFC ....not on OEM set up :thumbup:
 
1 - 7 of 7 Posts
Top