[delzx7r]

Simon,
I`m a newbie...Not picking the car up till next week but I`m looking to get everything right.....I currently run fully synthetic Motul oil in my bike ( which is extremely modified engine-wise ) and in my current car ( A Hyundai F2 ...which isn`t )...I`ve been toying with the idea of a teflon additive for the bike as it runs at higher than normal temps.....I`m wondering if you have any opinion on them..i.e. to use or not to use
Cheers
Del
http://www.delzx7r.co.uk

 

[oli goon]

consensus of opionion is that they are not good for longevity as they tend to collect in small oil ways etc but may reduce friction a bit and therefore give more power through reduced losses.

i used some slick50 on my tme and i dont think it made much difference. i wouldn't do it again though as the tappets tend to get gummed up anyway let alone when the engine is swimming in ptfe particles.

 

[delzx7r]

Thanks Oli...I`ll steer clear then I think