Lancer Register Forum banner
Cancel

nuts and bolts evo 1 manifold

1506 Views 10 Replies 6 Participants Last post by  paul stevo, 
paul stevo
need all reqiuerd bolts to exhaust manifold ,
too fit the manifold to block , " nuts i think" , also all the bolts to bolt the turbo to manifold , need new ones as mine are rounded off and dont fancy that happeneing again , or if anyone can think of a good trader who sells them ,


not some bloke munching a sandwich " whilst on the phone in me ear who couldnt give a flying fig what you want for your car ! , " bad expereince with a trader i rang from here in december , useless **** , ! although they have been good in the past , im not impressed ! "camskill"

my car is an evo 1 all standard
Reply
Save
Like
1 - 11 of 11 Posts
O
Here you go

Here you go

Manifold Nuts
MD050076 x 2 Plain Washers
MD165879 x 2 Nuts
MD092806 x 7 Self Locking Nuts
MD041192 x 7 Plain Washer

Manifold Studs
MD146938 Studs 10x28mm x 2
MD005317 Studs 8 x28mm x 7

Manifold to Turbo Fittings
MD132656 Bolt x 3
MD132933 Plain Washer x 3
MD132930 Nut x 1
MD132933 Plain Washer x 1
MD050075 Stud x 1

Oil feed Pipe
MF660064 Copper Washers x 2

Oil Drain Pipe to turbo Gasket
MR258477 x 1

Manifold to turbo Gasket
MD171220 x 1
MD171221 x 1 Sealing Ring

Cylinder Head to Exhaust Manifold Gasket
MD181032 x 1

Take your pick

Mike THE
useless ****
Click to expand...
@ Camskill
See less See more
Reply
Save
Like
paul stevo
top man thanks , will order these from ralliart kingswood , friendly helpfull service there , cheers for the part numbers bud !!!
Reply
Save
Like
paul stevo
just realised your from camskill ,, didnt mean that reply to sound as bad as it does , cheers for the part numbers , well aware you cant get them , cheers agian
11 sent you pm!
Reply
Save
Like
Dave@ears
Paul mate..

Apologies pal, I got your PM, but i've had a few probs (in & out of hospital all month!!!)

If you still need the bits let us know, as i've got most of them here..

Cheers..
Reply
Save
Like
karlosg
Re: Here you go

oakleaf said:
Here you go

Manifold Nuts
MD050076 x 2 Plain Washers
MD165879 x 2 Nuts
MD092806 x 7 Self Locking Nuts
MD041192 x 7 Plain Washer

Manifold Studs
MD146938 Studs 10x28mm x 2
MD005317 Studs 8 x28mm x 7

Manifold to Turbo Fittings
MD132656 Bolt x 3
MD132933 Plain Washer x 3
MD132930 Nut x 1
MD132933 Plain Washer x 1
MD050075 Stud x 1

Oil feed Pipe
MF660064 Copper Washers x 2

Oil Drain Pipe to turbo Gasket
MR258477 x 1

Manifold to turbo Gasket
MD171220 x 1
MD171221 x 1 Sealing Ring

Cylinder Head to Exhaust Manifold Gasket
MD181032 x 1

Take your pick

Mike THE @ Camskill
Click to expand...
I must admit , I have had nothing but excellent service from mike + nathan at camskill so im sure this was a total 1 off .And i get stuff sent out virtually everyday at the Mo LOL.

Karl
Reply
Save
Like
paul stevo
i did say in a post before this one they had been good up untill this day it was just that day i rang them in january , whom ever i spoke to couldnt give a flyinf fig , but i have to admit there still good service via internet and fast delivery as i ordered from them on tuesday night and got parts thursday morn , just was dissapointed with phone convo i had when i rang up , i still dont know whom it was , again thanks to the reply from camskill
Reply
Save
Like
O
Do not Know Who

I honestly Do not Know Who you got on the phone. Possibly Jim whose only been there 3-4 months.

Anyways you've helped us to help you to help us as I'm buying all the studs/nuts/Bolts/washers etc for ALL the Evo's around the manifold then sending to a nuts and bolts type business thus finding better quality studs/nuts/Bolts/washers etc and they will be a stock item at less than Mitsi or just buy loads of OE from Japan.

I have a ready made list above :D

Mike
Reply
Save
Like
C
Must say Mike at camskill always been 100% for me :)


Ordered countless stuff and service been A1. He's also nice on the phone to :D

dam shame about the nuts and bolts though as I just done mine and paid waaay to much from mitsi :eek:

for example the manifold to turbo bolts are like £9 each :eek:
Reply
Save
Like
evo1 4life
camskill are a great help in running my car. thanks guys.
no doubt ill need these bolts in the future!!!

Dunstan.
Reply
Save
Like
paul stevo
yep i got the the 7 12mm nuts
and two 14 mm nuts, then a manifold gasket and turbo gasket and down pipe gasket , and two spare studs for manifold " just incase"

£53 :shrug: from mitsi..
Reply
Save
Like
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Lancer Register Forum
A forum community dedicated to Mitsubishi Lancer owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Lancer Chat Picture & Video Gallery Private Sales - Parts Technical Questions Wanted
Top