Lancer Register Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
240 Posts
Discussion Starter · #1 ·
Hi guys

A friend of mine got his engine rebuilt for this evo 9.

The problem is that the engine has never started and I'm looking for the cause. The problem was found on the exhaust side.

What do you think is the cause?

PS: Cams are Jun 272

Cheers
 

Attachments

·
Premium Member
Joined
·
10,664 Posts
If the builder has got something as simple as inlet and exhaust bearing caps wrong , I would be very worried about the quality of the build.
 

·
Premium Member
Joined
·
240 Posts
Discussion Starter · #4 · (Edited)
If the builder has got something as simple as inlet and exhaust bearing caps wrong , I would be very worried about the quality of the build.
Hi Mita

I said the same thing at my friend.

Also I think the builder didn't bleed the new oil pump and new lash adjuster.

And for him, the builder, it was a problem with exhaust cam. According to him it was a defect in the cam and the pin that blocks the pulley.
 
1 - 4 of 4 Posts
Top