Lancer Register Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
595 Posts
Discussion Starter · #1 · (Edited)
Ive been plodding along with this for a good few weeks now. Finally finished yesterday and had them pressure tested this morning. Passed ok. 2 x D2 8 pots and 2 standard rear brembos.

Calipers stripped, blasted and powdercoated

All other bits powdercoated

Threads cleaned up.

Piston bores polished

New custom seals made for the D2's

One new stainless tube fitted across one of the D2's as the old one had snapped

2 x new pistons fitted in one of the rear brembos

Brembo seals cleaned (only 12 months old)

Pad plates polished

New bolts in everything

New brembo decals, D2 decals made up

Rebuilt

Pressure tested to over 1000 psi with no issues.



Sent from my SM-G930F using Tapatalk
 
1 - 3 of 3 Posts
Top