Lancer Register Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
if you are about to buy one of these,bear this in mind ,

just fitted cusco lower brace and,
well i didnt cos it would hit the magnex front pipe !
Had to have a section cut and welded to clear pipe.
 
G

·
Discussion Starter · #2 ·
Or u cud install spacers 2 slightly lower the brace and clear the pipe.

This is required even with the factory lower brace.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top