Lancer Register Forum banner
1 - 1 of 1 Posts
G

·
Discussion Starter · #1 ·
For information:
Have had tracking checked and adjusted at ATS with Mitsubishi Gatwick settings:
Parallel to 3mm toe-in, aim towards parallel in preference .

Presumably this is just the front wheels for adjustment. ATS also set the rear at 1.5mm toe in. Hopefully this is fine.

Car feels less scrabbly (was at 9mm toe-in after steering adjustment earlier in year!)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top