lancer gti

rather than using rad weld, easier and better to pull the hoses feeding the matrix from the bulkhead fittings and place a piece of pipe, jubilee clipped between them, bypassing the matrix. if its the matrix no more water, if still water then door seals or leak in bulkhead (missing gromets etc.). most likely to be matrix and i agree if similar to evo its a mare of a job.
alex

you don't have to take out the dashboard but you do have to spend about 4 hours on your back in the wet footwell, upside down, cursing while trying to lever the pigging bits out. amazingly it all goes back together a lot easier than it is to take apart. i know i'll probabily be doing it again next weekend. the joy.
alex