Lancer Register Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 · (Edited)
Hi. Was just after a bit of advice and different peoples opinions really.
I am looking for a good all round tool capable of diagnosing both ecu and ayc ecu faults for e5-e8. (And with the possibility of future mapping)After a bit of googling and looking on here EvoScan keeps coming up. I have looked on the website and it seems it would do everything I will need but wanted the opinion of people who have it or have used it.

The main reason is that I am currently (and have been for a month) looking for either an e5 or e8 to buy (my first evo :) ) I went to look at an e5 the other day and apart from the obvious paint work (including overspray) I noticed the ayc light did not come on before the engine was started. Needless to say I walked away from this one and came to the conclusion a diagnostic tool would be very useful in my hunt for the perfect evo.

If I go for the evoscan I believe I would need the 1.3u cable and software?
Thanks
 

·
Premium Member
Joined
·
9,730 Posts
yes evoscan will do all that but you need openport 2 cable if you want to flash 5/6 ecu also look for ecuflash software
 
1 - 3 of 3 Posts
Top