Lancer Register Forum banner

1 - 9 of 9 Posts

·
Premium Member
Joined
·
88 Posts
Discussion Starter · #1 · (Edited)
Dont mind if new or used but have to be in good condition unless very cheap

feel free to pm me or text me on 07957051110 for a quick reply
thanks for helping out on my rebuild after previous owner gave me loads of false details so starting from scratch with the car as shell is solid

parts needed-
under bonnet vent
wheel arch plastics
radiator
radiator fan
turbo j pipe
stainless manifold cover
forged pistons and rods
rear strut brace
oem sump
valves and valve guides
red/black silicone pipes
ayc diff (may be needed)
oil pump
water pump
main and head studs
10.5 turbo (preferbly mr)
harness bar/half cage
all belts
prosport gauges??

also feel free to let me know what bits you have that may be of use to me??

thanks again to anyone that can help.
will add more parts that are needed throughout the build and will do a write up as going along
 

·
Premium Member
Joined
·
1,269 Posts
Dont mind if new or used but have to be in good condition unless very cheap

feel free to pm me or text me on 07957051110 for a quick reply
thanks for helping out on my rebuild after previous owner gave me loads of false details so starting from scratch with the car as shell is solid

parts needed-
under bonnet vent
wheel arch plastics
radiator
radiator fan
turbo j pipe
stainless manifold cover
forged pistons and rods
rear strut brace
oem sump
valves and valve guides
red/black silicone pipes
ayc diff (may be needed)
oil pump
water pump
main and head studs
10.5 turbo (preferbly mr)
harness bar/half cage
all belts
prosport gauges??

also feel free to let me know what bits you have that may be of use to me??

thanks again to anyone that can help.
will add more parts that are needed throughout the build and will do a write up as going along
hi i have got the oil pump..water pump and sump
all from a 44,000 mile engine...
 

·
Registered
Joined
·
2,678 Posts
I have loads of the parts you need please pm's me if you still need them and I will price for you
Cheers Julian
 

·
Registered
Joined
·
349 Posts
I've as new arch liners and a 3" custom elbow and downpipe.
Also a few odds lying around, new crank trigger plate, std inlet maifold with idle etc
 
1 - 9 of 9 Posts
Top