Lancer Register Forum banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
Hi Rich,

My boost guage reads 1.39 peak after doing a fast run changing gears at 6500 - 7000 rpm........the boost controller was set to 1.2. My boost guage tends to over read - without the EVC it reads the standard boost peak to be 1.18!! But remember this is PEAK and not sustained boost.

So far I have not noticed any fuel cuts, but I've only had the EVC fitted for less than 24 hrs. I will keep updating this thread as I get more familiar with my new toy!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.