Lancer Register Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
447 Posts
Discussion Starter · #1 ·
Evening all, im a virgin at this so be gentle, I now have an Evo 8 FQ 320 (7000 miles) im considering mods to the beast, what should i start with?.

Any help will be most appreciated. Names prices dates anything !!

Cheers kunkle kev xx
 

·
Registered
Joined
·
4,256 Posts
forged re-biuild
gt35 turbo
ams intercooler
ap brakes front rear
18" alloys


the usual. oh and those bottomless pockets help!
 

·
Registered
Joined
·
30,469 Posts
I would start with an Airfilter, then Decat folowed by exhaust.

It depends how far you want to go, you may want a boost controller. The Apexi AVCR is good.

Have a look here http://shop.indigo-gt.com there are pleanty of ideas.

AVCR - £295
Power Intake Airfilter - £99
Walbro Fuel Pump - £85
Decat - £75.98
Blitz Nur Spec R - £522.38
ECUTek Remap - £550+VAT

That lot would give you a really good start possibly around 380-400 bhp.

Thanks

Antony

PS bit of Dejavou me thinks
 

·
Registered
Joined
·
4,256 Posts
I would start with an Airfilter, then Decat folowed by exhaust.

It depends how far you want to go, you may want a boost controller. The Apexi AVCR is good.

Have a look here http://shop.indigo-gt.com there are pleanty of ideas.

AVCR - £295
Power Intake Airfilter - £99
Walbro Fuel Pump - £85
Decat - £75.98
Blitz Nur Spec R - £522.38
ECUTek Remap - £550+VAT

That lot would give you a really good start possibly around 380-400 bhp.

Thanks

Antony

PS bit of Dejavou me thinks
can't fault those prices!!

i'll be buzzing you shortly for those U.S sourced bearings and also some 87mm pistons! :D

cheers
 

·
Registered
Joined
·
4,256 Posts
Re: cheers

kunkle kev said:
Thanks for the info, will print and run by the bed warmer, who would you suggest for the remap..??
not sure as your in nottingham but DON'T just use anyone, get a recommendation first, get it map'd right and she'll fly, get it map'd wrong and she'll fly....BUT ALSO GO BANG!!
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top