Lancer Register Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
hi all

i just have a few question for anyone willing to take time to anwser them. i currently own a gsr (1995). i was just after some information. i wanted to know what turbo to use how much boost, exhaust size, pistons, diff and everything else under the hood. basically i need it to run about 10 sec. q/mile on slicks. i have bilstein suspension, stillen brakes and continental tyres with 17 inch wheels.

plz feel free to make any sugestions about anything.




p.s. im not very familiar with technical terms. im new to all this so im just after some advice to make sure it runs smooth.

thank you
 

·
Registered
Joined
·
7,349 Posts
you'll need a minimum of 450bhp at the wheels to run 10's
in a GSR
AFAIK, no-one here in the UK has achieved that in a a GSR or for that matter, any early evo1-3

for cheap performance parts, have a look at the US-based sites
such as: www.slowboyracing.com
+ don't forget to factor in a management system - MoTec, Autronic, Haltech etc

would suggest you look nearer to home for prep work
such as Rigoli Racing, RPI etc
 

·
Registered
Joined
·
7,349 Posts
gsr-13 said:
thanx for your help
p.s. there is a gsr here in australia that runz 10 sec. q/mile
no problem...
from above, for your performance parts, do a search for 'DSM'....

re: gsr....
yes....that's Brett Lodge's car....& he's running approx
450-500+ bhp at the wheels to get the 10's
 
1 - 4 of 4 Posts
Top