Lancer Register Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
809 Posts
Discussion Starter #1
I have looked at this link that I found in a previous thread which is a good start.

Once you take out the glove box how on earth do you get to the screws to remove the ECU?

There is hardly any room to move there and I can't see how you would get a screwdriver in there!

I am completely stuck.

Please help.
 

·
Underground mapper
Joined
·
19,830 Posts
Unplug the connectors from the bottom of the ECU and then use a 10mm socket on an extension bar to undo the bolts

Andy
 
1 - 3 of 3 Posts
Top