[Timmo]

All the best with the build. There will be times you'll think why am I doing this but keep plodding on and the rewards are second to none. :smthumbup

 

[Timmo]

I'll have to have a look at the rust bullet range, what products will you be using or is it just "rust bullet" and that's the only one ?
Once it's painted red will you just leave it as paint ?

Not sure on the Op's plans but I'll give you the way I did mine. Rust bullet x 3 coats, primer sufacer, seam sealed, top coat. There's also flatting down stages in between those aswell. Hope that helps. :smthumbup

 

[Timmo]

That's the plan.:smthumbup ... Its partly your fault im doing all this !!!

If I can get mine looking remotely like yours I shall be a happy man .. its stunning :smthumbup

And to think you did it all laid on your back on the garage floor Your a hero :smthumbup

Ive been looking at Rust Bullet Clear Shot , Didn't know if I should put that over the top coat of paint as extra protection ?

Makes it all worth while hearing compliments like that so thankyou. it's not been easy doing it on the floor in such a tight space but if your determined to do it then you will.

Best advice I can give is take your time. Don't Rush as you won't be happy and you'll end up doing it again.

To be honest I'd just stick with what I did but it's entirely up to you.

All the best with your build. I'll be keeping a watchful eye. :smthumbup