Lancer Register Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
Hi, i would like to know if we can fix the cam shaft of the 2.6 liter turbo from the starion on a lancer EX? ( i do't know the angles so...)

Which best sparkplugs can we put on the engine 2000 EX? and if the model is special where can we find those ?

Best regards.
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #3 ·
xlr8 said:
no....
it's an entirely different engine....originating from a Mitsi truck

- if you're trying to make it rev more...don't forget to remove the balance shafts in the block to lose weight/spin better
However, the standard 8v engine is best for torque, not high revs
& torque = acceleration

plugs:
use BR7ES / BR8ES ......or the same in platinum tip
- higher number = colder plug so good for high boost
- don't use iridium
thanks a lot, it is totally what i would like to know about starion engine!
It i not esay to have access to information for japanese engine ( at my place...)

Ok for spar plugs!
Thanks
 
1 - 2 of 2 Posts
Top