Lancer Register Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
as above , i,m putting in a lttle sup and little amp as i do like my music anyway.
in the e9 there is alot of fire proofing between engine bay and cabin any ideas on which gromet or inlet to go for .. :goingmad:

and the power lead will hopefully going down the passengers side . and any info on gettin the clips off the door sill without breaking the clips would be great '
cheer's lads :
 

·
Registered
Joined
·
2,968 Posts
Gromit in the passenger well - its where the main loom goes through and i know its big enough as i got a 4 gauge through there and boost control stuff.

Get right in, look towards the center about 1 oclockish up in the well
 

·
Registered
Joined
·
4,966 Posts
There's also a grommet in the drivers footwell. It's up to the right near where the throttle cable enters the engine bay.

Also, more info here:
http://lancerregister.com/showthread.php?t=194953

(I'm afraid the photos of the drivers side grommet were hosted on image shack or something and they have gone now.)
HTH
 

·
Registered
Joined
·
2,514 Posts
Mine is down the passenger grommit, behind the suspension top.
The sill covers just unclip with a bit of leverage.
 
1 - 4 of 4 Posts
Top