Joined
·
700 Posts
Hi everyone.
I'm selling the following items which I'm not going to use in the future.
Removed from a low mileage EVO8 MR FQ, all near mint condition.
EVO8 MR FQ 3 connector 3 row ECUtek licenced oem ECU, no case. 170GBP
1x carbon front canard drivers side new 40GBP
1 pair of oem cam gears 15GBP for the pair
Lower bumber cover plate in blue 10GBP
MAF delete kit with filter adapter 40GBP
Carbon dash backplate, new 70GBP
Fancy battery holder 15GBP
Turbo mesh-less trumpet intake 10GBP
6spd gear linkage kit with brackets, gear selector, speed sensor 40GBP
1x front engine mount and 1x gearbox side mount 15GBP for both
Oem battery tray 5GBP
Front A pillar trim 5GBP
Bonnet mesh with plastic tray 10GBP
2x Bonnet middle vents 50GBP for the pair
Washer bottle 10GBP
Door triangle covers 5GBP each
Rear lower arm brackets 10GBP for both
Rad holders without rubbers 5GBP for both
OEM fuel rail with oem FPR 10GBP
OEM intercooler piping pieces with metal upper alloy pipe, mid pipe and rubber bits 60GBP
OEM lower front cross brace 15GBP
Blitz turbo timer 25GBP
2x rear Brembo calipers, tatty paint but good working order, seals pistons are all OK 120GBP for the pair
EVO8 SS intercooler piping kit with silicone joiners 60GBP
Oem O2 housing 10GBP
Oem exhaust manifold 30GBP
2x Oem front 3point strut braces 40GBP per piece
Located near Reading. Viewing and collection is more than welcome.
Any questions, feel free to contact via private message.
Pictures on request, will upload some later.
I'm selling the following items which I'm not going to use in the future.
Removed from a low mileage EVO8 MR FQ, all near mint condition.
EVO8 MR FQ 3 connector 3 row ECUtek licenced oem ECU, no case. 170GBP
1x carbon front canard drivers side new 40GBP
1 pair of oem cam gears 15GBP for the pair
Lower bumber cover plate in blue 10GBP
MAF delete kit with filter adapter 40GBP
Carbon dash backplate, new 70GBP
Fancy battery holder 15GBP
Turbo mesh-less trumpet intake 10GBP
6spd gear linkage kit with brackets, gear selector, speed sensor 40GBP
1x front engine mount and 1x gearbox side mount 15GBP for both
Oem battery tray 5GBP
Front A pillar trim 5GBP
Bonnet mesh with plastic tray 10GBP
2x Bonnet middle vents 50GBP for the pair
Washer bottle 10GBP
Door triangle covers 5GBP each
Rear lower arm brackets 10GBP for both
Rad holders without rubbers 5GBP for both
OEM fuel rail with oem FPR 10GBP
OEM intercooler piping pieces with metal upper alloy pipe, mid pipe and rubber bits 60GBP
OEM lower front cross brace 15GBP
Blitz turbo timer 25GBP
2x rear Brembo calipers, tatty paint but good working order, seals pistons are all OK 120GBP for the pair
EVO8 SS intercooler piping kit with silicone joiners 60GBP
Oem O2 housing 10GBP
Oem exhaust manifold 30GBP
2x Oem front 3point strut braces 40GBP per piece
Located near Reading. Viewing and collection is more than welcome.
Any questions, feel free to contact via private message.
Pictures on request, will upload some later.
