Lancer Register Forum banner

Evo x u0151 no comms with restraints module

1092 Views 8 Replies 3 Participants Last post by  Panther
Can anyone help me with this as I'm at the end of my tether with it.

Basically car was supposed to go in for gear linkage change as one cable got damaged. Due to the lockdown I decided to change the gear linkages myself.

Since reinstalling everything I have a srs airbag warning and dont know where to look for the fault anymore. To do the linkages I had to remove srs ecu then plugged all back togeather but now have this code.

I have tried clearing it with ecutek cable but it keeps coming back. I have tried to plug in another srs ecu and get the same no comms.

Does anyone know where the fuse maybe for this... everything is connected and wiring seems fine visually.

Any help would be greatly appreciated.

1 - 1 of 9 Posts
Hello. Did you ever resolve this issue? I am in a similar situation. I dropped my car off to have the AC evaporator replaced today. When I picked her back up, the SRS light was on. I scanned it and got the U0151 code. I do not believe the battery was disconnected while disconnecting the dashboard...
1 - 1 of 9 Posts