Lancer Register Forum banner
1 - 20 of 174 Posts

·
Registered
Joined
·
2,959 Posts
Discussion Starter · #1 ·
Ok, as a few of you already know I have decided to push the limits of the SST :D

Over the past few months I have been assembling all the parts that I need to get this done.

Today the car went up to Matt at TRL for the following to be installed.

Upgraded clutch plates rated to 425atw
Deep oil pan which hold 12 litres of gearbox oil instead of the standard 8
High volume pump which will push the oil around the gearbox quicker than the standard pump, keeping the temps down in the gearbox
Additional 6" high speed fan again to help with cooling the oil
Inline filter to reduce micro particles getting into the gearbox
AMS Intercooler
AMS Upper & Lower Intercooler Pipes
FP Red Turbo :coolsm:
Cosworth cams :D
800cc injectors
Fuel rail
Walbro Fuel Pump
Digital Boost/AFR/Gearbox Oil Temp Gauges
Triple Dash pod
RA Tailights :D
Carbon Bonnet Vents
XP8 pads allround

Remap :naughty:

A far as I can remember thats the lot :lol:

Hopefully be picking the car up the end of next week, and then will run it for a few weeks with the boost turned down, then back up to Matt for a full Remap.

Hopefully Matt will put some pics up of the work as it goes along with his comments on how the fitting is going :smthumbup

The clutch plates are the longest job according to the manufacturer at approx. 15 hours alone, so I think the guys are going to have their work cut out getting all this done by next week, but we shall see ;)

Hopefully pics to follow over the next few days
 

·
Premium Member
Joined
·
1,940 Posts
Good luck with the build :smthumbup

What figures you aiming for?
 

·
Premium Member
Joined
·
3,841 Posts
good on you :smthumbup

seems like a while ago we were talking about this at bluewater meet

bet it takes longer than 15 hours for the first one :crackup:

Rich
 

·
Registered
Joined
·
2,959 Posts
Discussion Starter · #4 ·
Good luck with the build :smthumbup

What figures you aiming for?
Cheers, fingers crossed eh :lol:

The car should make 500-520bhp with 460-480tq running at 2 bar.

Will be the first UK 500bhp SST :coolsm: :naughty:
 

·
Registered
Joined
·
2,959 Posts
Discussion Starter · #5 · (Edited)
good on you :smthumbup

seems like a while ago we were talking about this at bluewater meet

bet it takes longer than 15 hours for the first one :crackup:

Rich
Yeah its taken that long to get everything together and to find the time to get the car up to TRL as been working hard to pay for this lot :mhihi:

Yeah, I wouldnt put any money on them doing it in less than 15 hours :handsup:
 

·
Registered
Joined
·
2,316 Posts
500 horse with SST will be an absolute hoot!!

You'll find you need to go bike hunting not car hunting :naughty:

I hope it all goes well. I would love an SST at 450+ never mind 500+ :cool:
 

·
Registered
Joined
·
1,636 Posts
Hope it all goes well for you.
Dont forget to give me a shout when its back for the re-map..:smthumbup
I am still buzzing with only 390 Bhp.
That is going to be a monster!!:eek::eek:
 

·
Registered
Joined
·
5,408 Posts
not to self must get juggler to take me for a blast over the mountain round on the mlr iom weekend:smthumbup:smthumbup:smthumbup:smthumbup

john
 

·
Registered
Joined
·
2,277 Posts
Cheers, fingers crossed eh :lol:

The car should make 500-520bhp with 460-480tq running at 2 bar.

Will be the first UK 500bhp SST :coolsm: :naughty:
Good Luck juggler - many will be following this thread watching your progress mate :smthumbup
 
1 - 20 of 174 Posts
Top