Lancer Register Forum banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
These are the settings that I get from Graham Goode Racing for EVO V.

FRONT. Toe -in -3

Camber -1deg 00min |PLS|-30min (difference between right and left wheel less
than 30min)

or -2deg 00min |PLS|-30min

If arrow on top bolt that connects strut to knuckle. 1. Faces inboard then
camber is -1.00
2. Faces outboard then camber is -2.00

REAR. Toe-in mm 3|PLS|-2

Camber -1deg |PLS|-30min (tolerance is same as front)

Might be useful for someone to have them!!!


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.