Lancer Register Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,825 Posts
Discussion Starter · #1 ·
Just looking for a rough guide based on other peoples figures of what sort of power/torque have been achieved on standard turbos running an exhaust and airfilter and/or with cams.

Say 1bar, 1.2, 1.5 etc etc.

Thanks
 

·
Registered
Joined
·
1,825 Posts
Discussion Starter · #3 ·
I didn't realise the V came with more than one type of turbo?
 

·
Premium Member
Joined
·
23,183 Posts
Hi,

Std 5 turbo will do around 350/360 and the same sort of torque @ 1.5 bar with exhaust filter and a pump, around 370ish with cams. Some have seen more than that, but that ball park figures

Lee
 

·
Premium Member
Joined
·
14,884 Posts
I didn't realise the V came with more than one type of turbo?
It doesn't, the GSR/RS both come with TD05HR-16G6-10.5T (56mm inlet)
 

·
Registered
Joined
·
4,403 Posts
My car is running 370bhp at 1.7bar peak boost and holding at 1.6bar of boost. I have been told that typically holding between 1.6 and 1.65 bar of boost is the limit that it can take, after that it just blows hot air.

I should also point out that my car runs on autronic and was have not seen that level of boost being used with cars being mapped on ecutec, apparently the MAF can become unreliable.
 
1 - 7 of 7 Posts
Top