have a colt cyborg and am planning this conversion.Going to run it fwd for time being.Would a cyborg box(slip dif) bolt to the evo engine? also which clutch, release bearing etc do i need? i know this has been done before but cant seem to find any info
evo colt ca ,fwd gearbox and clutch options
1 - 3 of 3 Posts
Joined
·
1,581 Posts
My mate's doing one into a Satira GTi. He's used an Evo 1 as the donor car. I guess if you can find out if the box in the Satira is the same as the Cyborg then you (might) hae your answer.
He found his info out by searching for ppl who'd done the conversion and there are a few floating about. Look here:
http://www.cardomain.com/ride/2252076
AFAIK in order to do the 4x4 conversion you have to custom make alot of parts like propshaft etc
He found his info out by searching for ppl who'd done the conversion and there are a few floating about. Look here:
http://www.cardomain.com/ride/2252076
AFAIK in order to do the 4x4 conversion you have to custom make alot of parts like propshaft etc
kind of got an idea of what i need now!
need a 7 bolt 2.0 n/a flywheel and clutch, the evo one is to thick and catches on the inside of the box.
just need to find out which cars these come from and where to get an uprated clutch from!
anyone got any ideas?
need a 7 bolt 2.0 n/a flywheel and clutch, the evo one is to thick and catches on the inside of the box.
just need to find out which cars these come from and where to get an uprated clutch from!
anyone got any ideas?
1 - 3 of 3 Posts
Join the discussion
