Lancer Register Forum banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
93 Posts
Discussion Starter · #1 ·
Hi has anyone got a base map for a evo 8 2.3l with 272 cams they are willing to share so i can get my car running.
 

·
Premium Member
Joined
·
2,570 Posts
Id imagine if you said what ecu, Injectors etc etc you may get farther. Although can thr mapper not supply/load one for you?
 

·
Premium Member
Joined
·
93 Posts
Discussion Starter · #3 ·
sorry standard evo 8 ecu 1000cc injectors.
 

·
BAD BISH
Joined
·
762 Posts
SD kit, Yay, nay?
 

·
Registered
Joined
·
226 Posts
Easiest way on stock ECU is to divide injector scaling by 1.15, so change your injector scaling from say 1000 to 869. That will inject the extra fuel needed and get you close to the right fueling.

Then you remap with a wideband from there.
 

·
Premium Member
Joined
·
93 Posts
Discussion Starter · #7 ·
Easiest way on stock ECU is to divide injector scaling by 1.15, so change your injector scaling from say 1000 to 869. That will inject the extra fuel needed and get you close to the right fueling.

Then you remap with a wideband from there.
What about the fact it's a 2.3 and has 272 cams I need a base for the timing and fuel do I not?
 

·
Registered
Joined
·
226 Posts
The injector scaling fixes the engine displacement.

For the cams, increase idle timing to 10 deg and if that doesn't do it, then increase idle to 1000rpm and if that is not enough, richen idle fueling.

Sent from my TECNO-C9 using Tapatalk
 

·
Premium Member
Joined
·
93 Posts
Discussion Starter · #9 ·
Cool thanks at last a good answer
 
1 - 10 of 10 Posts
Top