Lancer Register Forum banner

1 - 15 of 15 Posts

·
Premium Member
Joined
·
63 Posts
Discussion Starter · #1 ·
Hi Guys,

*

First post on here :)

Just a quick question, what is the dimensions of the bolt pattern on the evo 7 spoiler? As i want to make a spoiler bracket and don't know the measurements as my car is away for some time! Thank in advanced!

*

Paul
 

·
NR555
Joined
·
7,419 Posts
I have a spare one in my garage, I'll give it a measure tonight
 

·
NR555
Joined
·
7,419 Posts
Is it the bolts to the boot lid or the end of the blade?

I only have a spare blade to measure, not the uprights :handsup:
 

·
NR555
Joined
·
7,419 Posts
Sorry, can't get those :handsup:
 

·
Premium Member
Joined
·
727 Posts
I have a spare 7 boot lid, the measurements from bolt hole to bolt hole on the right hand mounting are as follows assuming the boot lid was on the car and closed... All measurements are going to be give or take one or two mm though really....

Rear right hole to front right hole = 155mm.
Rear right hole to left hole = 110mm.
Left hole to front right hole = 150mm.
 
1 - 15 of 15 Posts
Top