Lancer Register Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
731 Posts
Discussion Starter · #1 ·
I want to remove the tinted windows on my Evo 6, but I am not sure yet of the best way. I believe I have to do the rear window "in place" but what about the rear doors windows? Is it hard to take them out? Any advice on products to use? Never done it before, and especially not on an Evo...
 

·
Premium Member
Joined
·
3,453 Posts
I want to remove the tinted windows on my Evo 6, but I am not sure yet of the best way. I believe I have to do the rear window "in place" but what about the rear doors windows? Is it hard to take them out? Any advice on products to use? Never done it before, and especially not on an Evo...
I did mine without stripping anything. Use a heat gun and get the film quite hot, If you don't, the adhesive will stay behind and it's a bitch to clean. Use blade to help you lift the film so you can then peel off. :thumbup:
 

·
Registered
Joined
·
173 Posts
I used a wallpaper steamer just removed the plastic plate at the end of the hose. Very little glue left on the glass. Used autosmart glue remover to remove remainder of glue.
 
1 - 4 of 4 Posts
Top