Lancer Register Forum banner

Evo 5/6 Momemtum motorsport front subframe

2K views 9 replies 4 participants last post by  Gaz2053 
#1 · (Edited)
I have a brand new never fitted Evo 6 Front tubular subframe

This will fit a 5 or 6 and will allow the use of a 9 transfer box

This is taken from the website.Many assume that fitting a tubular subframe to their car has only one benefit - weight saving. In the case of the Momentum Motorsport Tubular Front Sub-Frame, that most certainly isn’t true.

The Evo 4-6 large transfer case conversion allow fitment of the later Evo 7-9 transfer case, this is more robust and give the option of going active.
It requires some bulkhead modifications and use of the later 7-9 steering rack, transfer case, rear mount and prop shaft nose.

You also vastly increase the strength and rigidity of the whole front suspension assembly through solid-mounting. This increased strength and rigidity minimizes flex, in turn helping to maintain geometry settings under load, maximizing response and grip. For those who demand absolute adjustability and suspension control, combining our front-subframe with our rose-jointed adjustable front arms gives you complete control over a huge range of geometry settings.

Just under £2500 inc vat

Price £1500

Located in Barnsley.

Tel 07921081064
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top