Lancer Register Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter · #3 ·
Thanks for the reply,i don't know why they put a plate under the rear seat if you can't remove the pump from it its just a tease lol.
 

·
Registered
Joined
·
357 Posts
Discussion Starter · #5 ·
NO YOU DONT ,do it through the inspection cover its FIDDLE but doable
thanks for the reply have you got any tips? ive disconnected the 2 hoses that are connected to the hard pipes thats stopping it coming out but still can't get enough height to get it out :wallbang:
 

·
Registered
Joined
·
60 Posts
You have to cut pipes trought inspection hole, and after fitting new pump connect pipes using about 5cm pieces of fuelhose and good clamps. 6mm and 8mm hoses should fit
 
1 - 6 of 6 Posts
Top