Lancer Register Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
So my Evo 4 clutch can't handle the power and is slipping in higher rpm, looking to replace my clutch with something a little bit better nothing crazy but something in the 400 hp range. Was told Evo 8 clutch will work with Evo 8 flywheel on Evo 4 not sure though. I heard they changed from 6 bolt to 7 somewhere along the line so any Any advise will help. Thanks
 

·
Premium Member
Joined
·
20,559 Posts
So my Evo 4 clutch can't handle the power and is slipping in higher rpm, looking to replace my clutch with something a little bit better nothing crazy but something in the 400 hp range. Was told Evo 8 clutch will work with Evo 8 flywheel on Evo 4 not sure though. I heard they changed from 6 bolt to 7 somewhere along the line so any Any advise will help. Thanks
I know you can certainly use a VII clutch/flywheel on a IV ....:smthumbup
 

·
acting daft since 1969
Joined
·
19,575 Posts
there may be a dowl pin in the end of the 4 crank if so this can be whizzed of with a grinder ,i used a later clutch on my 4 worked perfect
 
1 - 6 of 6 Posts
Top