[Dark Evo]

Hi Steve

I used windscreen sealant to re-glue the lights back. There's a guy on http://forums.evolutionm.net/index.php? who carrys out a lot of pre MR light conversions as a trade.

See this thread

He is/was also working on the Cyber Evo lights, but it looks like he has been beaten to it

 

[Mike@Forge]

The gentleman on EvoM is EvoDave, and he can modify almost any headlight and/or tailight any way that you want, but he does it on a core-exchange type basis.

JDM MR, color-matched, etc.

The duct that he is working on will be very similar to your setup, I believe, and he's finishing it up now. He too is having the duct made in carbon fiber and he offers a lifetime warranty on the sealant that he uses when he closes the lights back up.

I'm sure it would be very difficult for you guys in the UK to have it do your lights, but he does great work.

 

[Dark Evo]

The gentleman on EvoM is EvoDave, and he can modify almost any headlight and/or tailight any way that you want, but he does it on a core-exchange type basis.

JDM MR, color-matched, etc.

The duct that he is working on will be very similar to your setup, I believe, and he's finishing it up now. He too is having the duct made in carbon fiber and he offers a lifetime warranty on the sealant that he uses when he closes the lights back up.

I'm sure it would be very difficult for you guys in the UK to have it do your lights, but he does great work.

http://forums.evolutionm.net/showthread.php?t=181208

great idea!

 

[gudmundur]

I really love this setup.

I have been waiting on Evodave to have his ready and available but I might as well do this myself.

Would you mind telling me where on Revotec I can find the air duct, I searched there but was unable to find it.

btw I tried sending you a pm but your pm quota was full

regards
Gudmundur

 

[boxman2000]

Yea, I've spoken to this guy on evolutionm, nice guy and pretty reasonable rates considering...... only problem is sending them to the US means you'll be without them for a few weeks!

Nice job! Shame it couldn't have had clear tubing put in the actual light with flexihose on the end for the engine bay to adjust the angle.

 

[V2AAA]

.

 

[DB04EVO]

.

That looks ace mate.:smthumbup
Was thinkin of attempting it myself at the same time as spraying the lights black. Struggling to find the teardrop shaped carbon intake on revotek site though? did you make that part yourself?

Dave.

 

[DimitrisIX]

can you please write a small how to guide? I have a spare headlight that i can use. Is it the 64mm revotec hose? How did you make that carbon bit thats on the headlight? custom made I guess

Do you absolutely need to take the light apart? how did you seal the area around the carbon bit and the lense?

thanks

 

[Scottsgta]

My question is on the painted reflectors in the headlight do they still pass an mot and how do u find they affected overall headlight beam 100% being without painted cheers for your help
Scott

 

[CarbonGoodies]

My question is on the painted reflectors in the headlight do they still pass an mot and how do u find they affected overall headlight beam 100% being without painted cheers for your help
Scott

the actual reflector isnt painted.
if you look again at the photos on page one, you can see the silver reflector around the bulb.

 

[Scottsgta]

[

 

[Scottsgta]

the actual reflector isnt painted.
if you look again at the photos on page one, you can see the silver reflector around the bulb.

reason i ask m8 is because of this how too thread and the second pic is of dark evos car clicky

 

[CarbonGoodies]

reason i ask m8 is because of this how too thread and the second pic is of dark evos car clicky

but look at the 3rd pic... this is all you spray, not the actual reflector.

 

[Scottsgta]

Ok m8 that aside will it pass an mot and how much does it affect overall headlight beam have u done this mod

 

[CarbonGoodies]

Ok m8 that aside will it pass an mot and how much does it affect overall headlight beam have u done this mod

its on my To Do list.
however, there are many on here that have, and I'm certain that knowing how crap Evo lights are in the first place, that if this mod affected the light output, they would return them to standard.
Also, noones gonna refirt a spare set of lights to pass an MOT, so yes, they'll pass.

 

[Scottsgta]

its on my To Do list.
however, there are many on here that have, and I'm certain that knowing how crap Evo lights are in the first place, that if this mod affected the light output, they would return them to standard.
Also, noones gonna refirt a spare set of lights to pass an MOT, so yes, they'll pass.

:smthumbup

 

[R3BB]

but look at the 3rd pic... this is all you spray, not the actual reflector.

Ok m8 that aside will it pass an mot and how much does it affect overall headlight beam have u done this mod

You're asking the same question CG has answered.
You're not doing anything to any of the beams by painting the surround this way.
You can paint the reflectors for the indicator and sidelights too, and they will still pass the MOT, but they're not as bright.

 

[Jamie 13]

Where can i get myself one of those carbon bits where your grille is located :coolsm: looks awesome:smthumbup