Lancer Register Forum banner
1 - 1 of 1 Posts

7,349 Posts
think I saw this on the 'gsr forums' ?

number of possible causes.... a few listed below:
1. knackered turbo actuator...change & see
2. boost creep.
...port the waste-gate and fit a bigger flap
or change the housing for a custom made item
3. don't reconnect the bleed valve
best to use a Dawes device/ other ballbearing & spring product
or fit an electronic boost controller
4. check all boost and vacuum pipes
5. check the boost solenoid which is situated under the battery tray

edited to say:
as per mike's post.....
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.