Lancer Register Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
New member here. Thank you for this forum!

Need info help on my 03 Lancer es. Just changed radiator and thermostat on car. Trying to get the air out of radiator. Is there a bleeder valve on this model? My radiator fans are not coming on nor is the fluid circulating in radiator. Put the cap on and after filling radiator, took down the road about 2 miles. Stayed at normal temp on gauge but fan did not turn on and the car did not over heat. Car was heated up in the 4 mile test drive. Wouldn't the fan come on? How do you tell if radiator is full and no air in it? Now waiting for engine to cool so I can open it to see if needs more fluid. :mitsi:
:handsup:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top