Lancer Register Forum banner

1 - 1 of 1 Posts

750 Posts
Discussion Starter · #1 ·
Hi All,

I have a slight oil leak from the rocker cover bolts and the rocker cover gasket so it looks like I need to change the seals. Just wondered how hard this job is and if there is anything to watch out for. Its for an evo 6

The other question I had I was going to order the following parts is there anything I am missing

MD340535 Rocker cover gasket
MD186785 x 4 Plug seals
MD327253 Bolt washers x 13 (or MD372347)

I also noticed that the bolt washer come in two sizes either 5.6mm MD327253 or 6.4 mm MD372347 is there anyway of knowing what the correct size is for my car.

1 - 1 of 1 Posts