Lancer Register Forum banner
1 - 8 of 8 Posts

·
Premium Member
Joined
·
557 Posts
Discussion Starter · #1 ·
Just wondered what people recommend or even use on the above spec, I have been looking at jun 272 or cosworth m2 cams. I know it's not going to rev to the likes of 9000rpm being a 2.3 so I didn't want to spec the cam too wild as it won't see the full potential of a wild cam.

It will be on a stock head and inlet too.
 

·
Premium Member
Joined
·
931 Posts
JUN were great cams, no date to see how they compare to more recent grinds:
Remember JUN was developed when HKS 264 an 272 were kings.

Tomei Poncam 270, in this case on stroker I'd go Procam: its an easy favorite.
Tomei cams are for sure top of the list.

R2 is very aggressive and seems to delay spool and only gain perhaps above 8000rpm over S2..in other words not quiet the hit we were hoping it would be.

Proof of this is the initial euphoria, and than- now R2 in classified sit for long time and nobody wants to buy them. S2 are snapped same day.
 

·
Premium Member
Joined
·
335 Posts
R2 is also not a straight forward drop in with springs and retainers I'm sure I read something else about the r2, went for the s2 myself on my 2.3
 
1 - 8 of 8 Posts
Top