Lancer Register Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
Does anyone know if you can move the standard brembo 4pots at the front to the rear??

Can you still get the spare tyre on?

what are the largest AP 6 pot kit / disc size possible for the fronts for the standard 17" enkeis?
 

· Registered
Joined
·
1,395 Posts
peteh said:
Does anyone know if you can move the standard brembo 4pots at the front to the rear??

Can you still get the spare tyre on?

what are the largest AP 6 pot kit / disc size possible for the fronts for the standard 17" enkeis?
Not a good idea as you will need to increase the master cylinder size to pump more fluid in to system. (the AP 6 pot kit has a similar fluid volume as the Brembos. But it is probably possible to make them fit if you want !

No the spare tyre will not fit over the Brembo 4 pot caliper (or the AP 6 pot) But will fit over the AP rear 4 pot. I have tried !!

332 by 32 for the standard 17" wheels and 362 for 18" and over
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top