Lancer Register Forum banner
1 - 2 of 2 Posts

Premium Member
2,442 Posts
Discussion Starter · #1 ·
Hi guys
To put you in the picture. I have an 6RS 2, fitted with an apexi AVC_R. I have a Power Fc mapped by Sam running 1.7 bar. After fitting a second hand turbo, the boost pressure kept going up to 1.7bar, so I turned of the avc-r & tryed running on the actuator, it was still hitting 1.7 bar, so me thinks the actuator is feecked, so I get a new forge actuator, & after I fitted it I ran it only on the new actuator, & it would still read 1.65 bar. Do you think there a problem with the turbo, or do I nead to mess about with the rod on the actuator. Any help will be appreciated, the car pulls like a train, but I am scared I do some major damage.


1 - 2 of 2 Posts